Weekly Semiconductor Intelligence

The Wafer

Semiconductor Intelligence Brief
9–15 November 2026 | GreyRadius Consulting

Executive Highlights

United States Applied Materials reports record US$10.41 billion quarterly revenue, up 53%. US$10.41B Q4; +53% YoY.
Germany Infineon forecasts approximately €20 billion revenue for FY2027. €20B FY27 forecast; ~€4B data-centre power target.
Taiwan TSMC October revenue surges 59.7% to NT$586.89 billion. NT$586.89B October; +59.7% YoY.
Taiwan MediaTek reports NT$55.03 billion October revenue, up 5.77%. NT$55.026B October; +5.77% YoY.
United States Onto Innovation forecasts US$430 million–US$450 million fourth-quarter revenue. US$430M–450M Q4 forecast; US$1.25B liquidity.
China | Unverified SMIC reportedly records 123.4% growth in third-quarter profit. Reported +123.4% YoY Q3 profit; unverified
United States / Japan | Unverified GlobalFoundries manufacturing groundbreaking — announcement requires confirmation. Project scope and capex not verified
Semiconductor equipment

Applied Materials reports record US$10.41 billion quarterly revenue, up 53%

12 November 2026 | United States

Applied Materials reported fiscal Q4 2026 revenue of US$10.41 billion, up 53% year over year, for the quarter ended 25 October 2026. FY2026 revenue reached US$34.45 billion, up 21%. Semiconductor Systems contributed approximately US$8 billion in quarterly revenue. GAAP and non-GAAP gross margins were 50.4% and 50.6%, respectively; GAAP diluted EPS was US$3.40 and non-GAAP EPS was US$4.16. Management guided to approximately US$11.10 billion in next-quarter revenue, plus or minus US$500 million. Equipment sales indicate investment momentum, not equivalent increases in operational wafer output or yields.

Source: Applied Materials

Strategic Watch

Track the conversion of equipment orders into shipments, fab installation, acceptance testing and customer-qualified production. Pay particular attention to advanced-packaging tool bottlenecks and customer concentration behind the growth.

GreyRadius Insight

Equipment spending is a leading indicator, not usable chip supply. Build fab investment scenarios around tool acceptance, yield ramp and packaging throughput; avoid converting a 53% revenue increase directly into wafer capacity.

Power semiconductors

Infineon forecasts approximately €20 billion revenue for FY2027

10 November 2026 | Germany

Infineon Technologies reported Q4 FY2026 revenue of €4.706 billion and Segment Result of €1.119 billion, a 23.8% margin. Full-year revenue was €16.353 billion, up 12%, with a 19.7% Segment Result Margin. For FY2027, management forecast approximately €20 billion revenue, including data-centre power-supply revenue approaching €4 billion. Planned FY2027 investment is €3.0 billion–€3.5 billion; the outlook assumes EUR/USD of 1.15. These are forecasts, not realised sales or confirmed factory output.

Source: Infineon

Strategic Watch

Monitor whether AI power-supply demand translates into design wins, production allocations and qualified deliveries. Watch utilisation, capital spending and currency sensitivity against the €20 billion guidance.

GreyRadius Insight

AI infrastructure growth expands the addressable market for power-management chips, but procurement decisions should assess efficiency per watt, thermal performance and qualification risk. Separate forecast demand from contracted orders when underwriting new capacity.

Foundries and advanced logic

TSMC October revenue surges 59.7% to NT$586.89 billion

10 November 2026 | Taiwan

TSMC reported October 2026 consolidated revenue of NT$586.89 billion, up 59.7% from October 2025 and 14.7% from September 2026. January–October revenue totalled NT$4,485.62 billion, an increase of 43.3% year over year. The monthly disclosure does not break down process node, site, customer, wafer shipments or advanced-packaging capacity. Revenue growth should not be treated as an equivalent increase in wafer production, utilisation or qualified supply.

Source: TSMC

Strategic Watch

Look for node-specific wafer capacity, advanced-packaging expansion, lead times and customer allocations in subsequent disclosures. Revenue may reflect mix and pricing as well as volumes.

GreyRadius Insight

For chip designers, rising foundry revenue increases the importance of securing both wafer starts and downstream packaging slots. Model time-to-delivery across the full manufacturing chain rather than using monthly sales as a proxy for available capacity.

Fabless chip design

MediaTek reports NT$55.03 billion October revenue, up 5.77%

10 November 2026 | Taiwan

MediaTek reported unaudited October 2026 consolidated revenue of NT$55.026 billion, up 5.77% from NT$52.026 billion a year earlier and down 0.67% from September 2026 revenue of NT$55.399 billion. January–October revenue reached NT$524.417 billion, up 5.35% year over year. The report does not attribute growth to chip categories, AI accelerators, process nodes or foundry partners; product-specific demand and manufacturing allocations cannot be inferred from the totals.

Source: MediaTek

Strategic Watch

Track product mix, design-win conversion, inventory and foundry allocation before attributing aggregate growth to AI or premium-node demand. A modest monthly decline can coexist with annual growth.

GreyRadius Insight

A fabless revenue trend is useful for demand screening, not capacity planning. Commercial teams should pair sales disclosures with customer programme schedules, chipset mix and manufacturing commitments before projecting supplier opportunities.

Metrology and inspection

Onto Innovation forecasts US$430 million–US$450 million fourth-quarter revenue

9 November 2026 | United States

Onto Innovation released Q3 2026 results and guided to US$430 million–US$450 million in revenue for Q4 ending 31 December 2026. It projected gross margin of 57.7%–58.3%, GAAP operating margin of 24.4%–24.8% and non-GAAP operating margin of 33.5%–34.5%. The company generated approximately US$79 million of Q3 operating cash flow and ended the quarter with US$1.25 billion in cash, cash equivalents and marketable securities. The outlook does not independently confirm tool installations, acceptance or qualified fab capacity.

Source: Onto Innovation

Strategic Watch

Watch equipment delivery schedules, inspection intensity and tool acceptance in advanced packaging and high-density manufacturing. Confirm whether the guidance reflects backlog conversion or new customer programmes.

GreyRadius Insight

Metrology can become a throughput constraint as process complexity increases. Buyers should assess inspection capacity, yield-learning speed and qualification milestones alongside the cost of equipment, rather than treating supplier guidance as installed production capacity.

Foundry earnings | Verification pending

SMIC reportedly records 123.4% growth in third-quarter profit

12 November 2026 | China | Unverified

Semiconductor Manufacturing International Corporation (SMIC) reportedly recorded a 123.4% year-over-year increase in third-quarter 2026 profit, according to the Reuters article identified in the supplied research. The original company financial disclosure and the article could not be independently verified in that research. Absolute profit, revenue, gross margin, wafer capacity, utilisation and capital expenditure remain unconfirmed. The increase should not be attributed to higher manufacturing volume, improved pricing or stronger product mix without the underlying results. This is a research candidate, not a verified financial announcement.

Source: Reuters

Strategic Watch

Obtain the original SMIC earnings statement and reconcile net profit, revenue, margins, utilisation and capex. Determine whether the increase reflects operating improvements, comparison effects or non-operating items before drawing capacity conclusions.

GreyRadius Insight

A percentage profit increase without the earnings base cannot establish structural competitiveness. Use verified wafer output, utilisation, process mix and margins to assess foundry economics; withhold investment conclusions until the disclosure is confirmed.

Fab construction | Verification pending

GlobalFoundries manufacturing groundbreaking — announcement requires confirmation

Reported 13 November 2026 | United States / Japan | Unverified

The supplied research identifies a potential GlobalFoundries announcement involving the groundbreaking of a semiconductor fabrication facility under a U.S.–Japan initiative. The original announcement, project location, investment amount, manufacturing technology, wafer capacity, construction schedule and government support have not been established. This candidate is included for completeness only and must not be described as a confirmed project. Even if groundbreaking is verified, it would represent a construction milestone, not commercial production, qualified yields or available customer supply.

Source: GlobalFoundries

Strategic Watch

First verify the primary announcement and identify the site, partners, committed financing, permitting, technology and construction milestones. Track equipment move-in and customer qualification separately from a ceremonial groundbreaking.

GreyRadius Insight

Do not add an unconfirmed fab to supply forecasts. Even verified construction projects need probability-weighted ramp scenarios based on utilities, tools, workforce, yields and customer qualification before they influence sourcing or market-entry decisions.

Market Data & Intelligence

MetricLatest ValuePublication DateRegionExecutive Implication
Applied Materials reports record US$10.41 billion quarterly revenue, up 53%US$10.41B Q4; +53% YoY12 November 2026United StatesEquipment spending is a leading indicator, not usable chip supply. Build fab investment scenarios around tool acceptance, yield ramp and packaging throughput; avoid converting a 53% revenue increase directly into wafer capacity.
Infineon forecasts approximately €20 billion revenue for FY2027€20B FY27 forecast; ~€4B data-centre power target10 November 2026GermanyAI infrastructure growth expands the addressable market for power-management chips, but procurement decisions should assess efficiency per watt, thermal performance and qualification risk. Separate forecast demand from contracted orders when underwriting new capacity.
TSMC October revenue surges 59.7% to NT$586.89 billionNT$586.89B October; +59.7% YoY10 November 2026TaiwanFor chip designers, rising foundry revenue increases the importance of securing both wafer starts and downstream packaging slots. Model time-to-delivery across the full manufacturing chain rather than using monthly sales as a proxy for available capacity.
MediaTek reports NT$55.03 billion October revenue, up 5.77%NT$55.026B October; +5.77% YoY10 November 2026TaiwanA fabless revenue trend is useful for demand screening, not capacity planning. Commercial teams should pair sales disclosures with customer programme schedules, chipset mix and manufacturing commitments before projecting supplier opportunities.
Onto Innovation forecasts US$430 million–US$450 million fourth-quarter revenueUS$430M–450M Q4 forecast; US$1.25B liquidity9 November 2026United StatesMetrology can become a throughput constraint as process complexity increases. Buyers should assess inspection capacity, yield-learning speed and qualification milestones alongside the cost of equipment, rather than treating supplier guidance as installed production capacity.
SMIC reportedly records 123.4% growth in third-quarter profitReported +123.4% YoY Q3 profit; unverified12 November 2026ChinaA percentage profit increase without the earnings base cannot establish structural competitiveness. Use verified wafer output, utilisation, process mix and margins to assess foundry economics; withhold investment conclusions until the disclosure is confirmed.
GlobalFoundries manufacturing groundbreaking — announcement requires confirmationProject scope and capex not verifiedReported 13 November 2026United States / JapanDo not add an unconfirmed fab to supply forecasts. Even verified construction projects need probability-weighted ramp scenarios based on utilities, tools, workforce, yields and customer qualification before they influence sourcing or market-entry decisions.

Editorial scope: Five developments supplied with direct company-source links are included. The SMIC profit report and GlobalFoundries groundbreaking candidate are excluded pending original-source confirmation. Financial outlooks are forecasts, not realised manufacturing capacity.

Turn Semiconductor Strategy Into Execution

GreyRadius helps leadership teams translate semiconductor market shifts into opportunity assessment, market-entry priorities, investment decisions and execution-ready growth plans.

Book a Free Strategy CallVisit Our Website